MODEL: R30MS4S[1]

ORDERING INFORMATION

• Code number: R30MS4S[1]
Specify a code from below for [1].
  (e.g. R30MS4S/Q)
• Specify the specification for option code /Q
  (e.g. /C01/SET)

NO. OF CHANNELS

4 : 4

COMMUNICATION MODE

S : Single

[1] OPTIONS

blank : none
/Q : With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to our web site.)
/C01 : Silicone coating
/C02 : Polyurethane coating
/C03 : Rubber coating
EX-FACTORY SETTING
/SET : Preset according to the Ordering Information Sheet
 (No. ESU-9004)

CAUTION

■  UNUSED INPUT CHANNELS
Set unused channels to "CH disabled" with PC Configurator software (model: R30CFG).  Otherwise, unused channels left open are unstable.

RELATED PRODUCTS

• PC configurator software (model: R30CFG)
Downloadable at our web site.
For connecting to PC, use commercially available Mini-B type USB cable. (provided by user)

GENERAL SPECIFICATIONS

Connection
 Internal bus : Via the Installation Base (model: R30BS)
 Input : M3 separable screw terminal (torque 0.5 N·m)
 Internal power : Via the Installation Base (model: R30BS)
Solderless terminal : Refer to the drawing at the end of the section.
    Recommended manufacturer : Japan Solderless Terminal MFG. Co., Ltd., Nichifu Co., Ltd. 
  (Solderless terminals with insulation sleeve do not fit.)
   Applicable wire size : 0.25 to 0.75 mm ²
Screw terminal : Nickel-plated steel
Isolation : Input 1 to input 2 to input 3 to input 4 to internal bus or internal power
Input range : Selectable with PC configuration software (model: R30CFG)
Conversion rate : Selectable with PC configuration software (model: R30CFG)
Status indicator LED : RUN, ERR
(refer to the instruction manual)
■Recommended solderless terminal size - M3 (unit: mm)

INPUT SPECIFICATIONS

Module type : Analog input, 4 points
Potentiometer : 100 Ω – 20 kΩ
Minimum span : 50 % of total resistance
Excitation : 0.1 V DC

INSTALLATION

Current consumption : 60 mA max.
Operating temperature : -10 to +55°C (14 to 131°F)
Storage temperature : -20 to +65°C (-4 to +149°F)
Operating humidity : 10 to 90 %RH (non-condensing)
Atmosphere : No corrosive gas or heavy dust
Mounting : Installation Base (model: R30BS)
Weight : 160 g (0.35 lb)

PERFORMANCE

Conversion rate / conversion accuracy :
10 ms / ±0.8%, 20 ms / ±0.4%, 40 ms / ±0.2%, 80 ms / ±0.2% (*)
(*) Factory setting
Response time : Conversion rate x 2 + 50 msec. (0 - 90 %)
Data range : 0 – 10000 of the input range
Data allocation : 4
Temp. coefficient : ±0.015 %/°C (±0.008 %/°F)
Input delay time : 50 msec.
Insulation resistance : ≥ 100 MΩ with 500 V DC
Dielectric strength : 1500 V AC @ 1 minute (input 1 to input 2 to input 3 to input 4 to internal bus or internal power)
1500 V AC @ 1 minute (power input to FE; isolated on the power supply module)

STANDARDS & APPROVALS

EU conformity :
EMC Directive 
  EMI EN 61000-6-4
  EMS EN 61000-6-2
RoHS Directive