48SV2

MODEL: 48SV2–[1][2][3][4]–[5]

ORDERING INFORMATION
• Code number: 48SV2-[1][2][3][4]-[5]
Specify a code from below for each of [1] through [5].
  (e.g. 48SV2-RV4WD-R)
• Special input range (For codes Z & 0)
• Bargraph scale (e.g. 0 – 100 %) (See ‘SCALE PLATE.’)

[1] BAR LED COLOR
R : Red
Y : Amber
G : Green
B : Blue

[2] MOUNTING DIRECTION
V : Vertical
H : Horizontal

[3] INPUT
Current
A : 4 – 20 mA DC (Input resistance 10 Ω)
B : 2 – 10 mA DC (Input resistance 20 Ω)
C : 1 – 5 mA DC (Input resistance 39 Ω)
D : 0 – 20 mA DC (Input resistance 10 Ω)
E : 0 – 16 mA DC (Input resistance 12 Ω)
F : 0 – 10 mA DC (Input resistance 20 Ω)
G : 0 – 1 mA DC (Input resistance 200 Ω)
H : 10 – 50 mA DC (Input resistance 5.1 Ω)
Z : Specify current (See INPUT SPECIFICATIONS)
Voltage
3 : 0 – 1 V DC (Input resistance 1 MΩ min.)
4 : 0 – 10 V DC (Input resistance 1 MΩ min.)
5 : 0 – 5 V DC (Input resistance 1 MΩ min.)
6 : 1 – 5 V DC (Input resistance 1 MΩ min.)
4W : -10 – +10 V DC (Input resistance 1 MΩ min.)
5W : -5 – +5 V DC (Input resistance 1 MΩ min.)
0 : Specify voltage (See INPUT SPECIFICATIONS)

[4] TERMINAL BLOCK
S : Screwless spring terminal
D : Separable screwless spring terminal

[5] POWER INPUT
DC Power
T : 5 V DC
(Operational voltage range 5 V ±10 %, ripple 10 %p-p max.)
R : 24 V DC
(Operational voltage range 24 V ±15 %, ripple 10 %p-p max.)

SPARE PARTS
• Scale plate

GENERAL SPECIFICATIONS
Construction : Panel flush mounting
Connection
Terminal block "S" : Screwless spring terminal
Applicable wire size 0.13 to 1.5 mm ² , stripped length 8 mm
Terminal block "D" : Separable screwless spring terminal
Applicable wire size 0.5 to 1.5 mm ² , stripped length 7 - 8 mm
Housing material : Flame-resistant resin (gray)
Isolation : Input to power
Zero adjustment accuracy range : -10 – +10 % (front)
Span adjustment accuracy range : 90 to 110 % (front)
Scale plate : Flame resistant resin (white scale & characters on black base)
Zero adj. indicator LED : Green LED turns on at zero adjustment
Span adj. indicator LED : Green LED turns on at span adjustment.
Read rate : 100 samples / sec.

BARGRAPH DISPLAY
LED : 55-segment LED (0 - 100% display: 51) 
     56 mm (2.2”) long, 3.5 mm (.14”) wide
Display range : 0 - 100% (No scaling. The first or 55th segment turns on when lower/upper overrange occurs.  The 2nd and 54th segments do not turn on.)
Scale
•  Numbers on the scale : 4 digits max.
 (Including decimal point and minus sign)
•  Divisions : 50 max.
•  Engineering unit : Max. 4 characters or 2 double-width characters

INPUT SPECIFICATIONS
■  DC Current : 0 – 50 mA DC; input resistor incorporated
Minimum span : 1 mA
When specifying a resistance value, choose from below.
5.1 Ω, 10 Ω, 12 Ω, 20 Ω, 39 Ω, 200 Ω
■  DC Voltage : -10 – +10 V DC
Input resistance:  ≥ 1 MΩ
Minimum span : 0.1 V
Offset : Max. 1.5 times span

INSTALLATION
Power consumption
• DC :
0.8 W or less @ 5 V rating
1.0 W or less @ 24 V rating 
Operating temperature : -5 to +55°C (23 to 131°F)
Operating humidity : 10 to 90 %RH (non-condensing)
Mounting : Panel flush mounting
Weight : 90 g (0.2 lb)

PERFORMANCE in percentage of span
Accuracy : ±2 % ±1 digit
Response time:  ≤ 0.5 sec.
Insulation resistance : ≥ 100 MΩ with 500 V DC
Dielectric strength : 2000 V AC @ 1 minute
(input to power to ground)

STANDARDS & APPROVALS
EU conformity :
EMC Directive 
  EMI EN 61000-6-4
  EMS EN 61000-6-2
RoHS Directive